By application

Laboratory testing

Piezoresistive pressure transmitter – Serie 21Y

The 21Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields. The 21Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields....

Read More

Immersion temperature probe – STI

This type of sensor is ideally suited for oil measurements, such as engine oil or other fluids within the limits of the RTD type sensing element. This model meets the requirements of MILSTD-810F. Its fast response time and good accuracy make it an ideal sensor for accurate measurements in harsh environments. A transmitter with an analog output (voltage or current) is integrated inside the body. The 316L stainless steel body and the laser welding between the body and the connector ensure an unma...

Read More

Position rotating sensor – Serie PS

PS-range sensors are designed to measure angle displacements over 340° to 350°. They can make different revolutions at the maximal rotating speed of 600 rev/min. They include a potentiometric plastic track.

  • Separate linearity: ± 0,05% (standard is ± 0,5%).
  • Infinite resolution.
  • Repeatability: 0.01 of the CET.
  • Rotating speed up to
  • Lifespan > 100x106 operations at 10 rev/s.
  • Protection class: IP 40.
...

Read More

Force sensor S – Serie F2712

Universal load cell combining high accuracy, sturdiness and easiness to install

  • Wide range of capacities : 100 N ‡ 1kN
  • Overload protection in tension and compression (not for 2712-5kN and 2712-10kN) (Large version)
  • Easy to install, compact design
  • Protection IP54 / IP 65 (See drawing)
  • Material : Anodized aluminum alloy
  • Cable length: 3m
  • Also available as standard reference load cells following ISO 376 (see 2712-ISO)...

Read More

Potentiometric and magneto resistive displacement sensor – PY2

PY2-range sensors are designed to measure linear displacements from 0-10 mm to 100 mm. Three measurement ranges are available, all with a linearity ranging from 0.2 to 0.1%.
They feature a contact tip and a return spring and they include a potentiometric plastic track.

  • Separate linearity up to ± 0,1%.
  • Infinite resolution.
  • Lifespan > 100x106 operations.
  • Displacement speed up to 10 m/s.
  • Protection class: IP40.
...

Read More

Potentiometric and magneto resistive displacement sensor- Serie PY3

PY3-range sensors are designed to measure linear displacements from 0-10 mm to 100 mm, with a linearity ranging from 0.3% to 0.1%. They feature a contact caster and a return spring and they include a single plastic track.

  • Separate linearity up to ± 0,1%.
  • Infinite resolution.
  • Lifespan > 100x106 operations.
  • Displacement speed up to 10 m/s.
...

Read More

Potentiometric and magneto resistive displacement sensor – Série LT

LT-range sensors are designed to measure linear displacements from 0-50 mm to 900 mm. Different measurement ranges are available, with a linearity ranging from 0.1% to 0.05%

  • They include a potentiometric plastic track.
  • Separate linearity up to 0.05%.
  • Infinite resolution.
  • Repeatability: 0,01 mm.
  • Displacement speed up to 5 m/s (optional: 10 m/s).
  • Lifespan > 100x106 operations.
...

Read More

Bending sensor – Serie F1200

F1200-range sensors are designed to measure forces by operating on both bending directions, through a measuring range from 0.5N (full scale) to 125N P.E.
This is the first low cost range of sensors offering accurate readings. Features proposed by vacuum-packed stress gauges are excellent, including exceptional long-lasting stability.
...

Read More

Miniature sensor – Serie F5930-F5932

Sealed and compact tension and compression sensors.

Material:

  • 5930: stainless steel
  • 5932: anodised aluminium alloy

Protection class: IP65

Capacities:
  • 5930: 200 – 300 – 500 N
  • 5932: 1 – (1.5) – 2 – (3) – 5 kN
...

Read More

Rotating torque meter – Serie CR1

The 4501A series torque transducer consists of a test body equipped with strain gauges and mounted free to rotate in a housing integrating the connectic. A rotating collector ensures the transmission of the signal between the test body and the housing.

  • EM FROM ± 0.5 TO ± 1000Nm
  • Accuracy 0.2%EM
  • Angle measure (Option A)
  • Different geometries (type H, Q, R)...

Read More

Cable displacement sensor – Serie CD 50

A linear CD50 works according to the principle of a thread taut between a mobile element and a fixed element, fitted with a return spring drum. The drum then converts the linear displacement into an angle displacement. The shaft of the drum is fitted with a potentiometer, and operates an incremental encoder or an absolute encoder....

Read More

Force ring – Serie F5180-F5182

Compression washer annular load cells specially designed for force measurement on bolts.

Material:

  • stainless steel body (5180)
  • aluminium (5182)

Capacities:
  • 5180: 50 – 75 – (100) – 150 – 200 – 300 – 500 – 750 kN
  • 5182: 20 - 30 kN
  • ...

Read More

Miniature sensor – Serie F5960-F5962

Sealed and compact compression sensors.

Material:

  • 5960: Stainless steel
  • 5962: anodised aluminium alloy
Class protection: IP65
CapacitIes:
  • 5960: 200 – 300 – 500 N
  • 5962: (0.75) – 1 – (1.5) – 2 – (3) – 5 – (7.5) – 10 – (15) – 20 kN
...

Read More

Miniature sensor – Serie F5910

Load cell combining high capacity with low design.

Material:

  • 5910: stainless steel
    Protection class: IP67
    Capacities:
    • 5910: (0.3) – 0.5 – (0.75) – 1 – (1.5) – 2 – 3 – 5 t...

Read More

ME2657 - High accuracy programmable attenuator with analog and USB outputs (table set)

MEIRI 2657-ATT90 USB box offers analog electronics allowing to attenuate voltage signals until -90dB, with a ±0.1dB accuracy.
Attenuated signal input and output are made thought BNC connectors.
Programming attenuation is set up from the front panel or from a USB plug.
A dashboard on the PC screen enables to set up the attenuator. It can also be programmed by a DLL included with the equipment. Standard model “A” is supplied by mains, version “B” is supplied by rechargeabl...

Read More

ME52C - Analog signal converter Rail DIN

The ME52C converts and amplifies signals originating from all types of electronic devices or sensor to deliver a standardized analog output (±10V, 4-20mA, etc.).

The ME52C is a modular analog signal converter for installation on a DIN rail. It is chiefly designed for the adaptation of signals in order to deliver an analog output which can be used by an acquisition system or a programmable controller.

It can also be used as a voltage or current amplifier, an impedance adaptor ...

Read More

2680C - Multichannel multifunction measuring unit

2680C measuring unit is able to condition from 4 to 16 sensors, with totally different sensor on each channel.
2680 control unit allows to set up acquisition channels configurations as gain, zero, offset… by sending digital commands handled through the control panel; or be set up with USB connection through a remote PC to acquire direct data and exploit them into Microsoft Excel for instance (.csv files)...

Read More

ME520 - Converter of signals and conditioner of analog sensors for strain gauges, DIN rail format.

The single channel measurement model ME520 provides very complete analog outputs for measurement, conditioning and conversion of signals such as strength, torque, pressure, displacement, acceleration sensors or strain gauges.
Three parameters can be adjusted with an easy procedure that allows output trimming depending on the sensor:

  • A potentiometer to trim gain
  • A potentiometer to trim zero
  • A push button to trim calibration
A wide range of opti...

Read More Read More