Defence
Piezoresistive pressure transmitter – Series 23(S)Y / 25Y
The Series 23SY / 25Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields. The limits of the CE standard are undercut by a factor of up to 10 with conducted and radiated fields.
- Series 23SY Ranges 0,1…1000 bar Fully welded (no internal seals)
- Series 25Y Ranges 0,5…1000 bar Flush, fully welded...
Piezoresistive pressure transmitter – Serie 21Y
The 21Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields. The 21Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields....
Immersion temperature probe – STI
This type of sensor is ideally suited for oil measurements, such as engine oil or other fluids within the limits of the RTD type sensing element. This model meets the requirements of MILSTD-810F. Its fast response time and good accuracy make it an ideal sensor for accurate measurements in harsh environments. A transmitter with an analog output (voltage or current) is integrated inside the body. The 316L stainless steel body and the laser welding between the body and the connector ensure an unma...
Potentiometric and magneto resistive displacement sensor – PY2
PY2-range sensors are designed to measure linear displacements from 0-10 mm to 100 mm. Three measurement ranges are available, all with a linearity ranging from 0.2 to 0.1%.
They feature a contact tip and a return spring and they include a potentiometric plastic track.
- Separate linearity up to ± 0,1%.
- Infinite resolution.
- Lifespan > 100x106 operations.
- Displacement speed up to 10 m/s.
- Protection class: IP40.
Potentiometric and magneto resistive displacement sensor- Serie PY3
PY3-range sensors are designed to measure linear displacements from 0-10 mm to 100 mm, with a linearity ranging from 0.3% to 0.1%. They feature a contact caster and a return spring and they include a single plastic track.
- Separate linearity up to ± 0,1%.
- Infinite resolution.
- Lifespan > 100x106 operations.
- Displacement speed up to 10 m/s.
Static torque meter – Serie CS1
- Material: Stainless steel
- Protection class: IP97
- Low design
- Cost-effective solution
- Sturdy design
- Easy to install
- Whole range of mounting kits available
- Cable length: 6 m...
Cable displacement sensor – Serie CD 50
A linear CD50 works according to the principle of a thread taut between a mobile element and a fixed element, fitted with a return spring drum. The drum then converts the linear displacement into an angle displacement. The shaft of the drum is fitted with a potentiometer, and operates an incremental encoder or an absolute encoder....
ME2657 - High accuracy programmable attenuator with analog and USB outputs (table set)
MEIRI 2657-ATT90 USB box offers analog electronics allowing to attenuate voltage signals until -90dB, with a ±0.1dB accuracy.
Attenuated signal input and output are made thought BNC connectors.
Programming attenuation is set up from the front panel or from a USB plug.
A dashboard on the PC screen enables to set up the attenuator. It can also be programmed by a DLL included with the equipment. Standard model “A” is supplied by mains, version “B” is supplied by rechargeabl...