APPLICATIONS
- Measure of rotating moves, of rotating speeds and of linear moves (through mechanical elements) in following fields:
- Electrical transmissions
- Machine tools
- Wood machinery
- Textile machinery
- Robots
- Handling equipments
DESCRIPTION
ROD 436 encoders are designed to measure angle displacements of rotating speeds.
They provide 4 sets of pulses:
Using a ME 26 F/U frequency conversion / voltage card makes possible to get a 0-10V analog output, depending on the rotating speed.
Using a ME 26-CO conditioning card makes possible to get a +/- 10V analog output, depending on the rotating speed.
- Two 90°-offset incremental encoders to perform the counting of both Ua1 and Ua2 angles.
- 1 Ua0 top zero.
- 1 UaS perturbation signal.
- As standard, they propose from 50 to 10,000 lines per revolution.
They provide 4 sets of pulses:
Using a ME 26 F/U frequency conversion / voltage card makes possible to get a 0-10V analog output, depending on the rotating speed.
Using a ME 26-CO conditioning card makes possible to get a +/- 10V analog output, depending on the rotating speed.
TECHNICAL FEATURES
| Number of line per 360° revolution | 50; 60; 100; 120; 125; 128; 150; 180; 200; 250; 254; 256; 360; 400; 420; 500; 512; 600; 625; 635; 720; 800; 900; 1000; 1024; 1080; 1125; 1250; 1270; 1500; 1750; 1800; 2000; 2048; 2080; 2500; 2540; 2920; 3000; 3600; 3750; 4000; 4096; 4500; 5000; 6000; 6400; 7200; 8192; 9000; 10000 |
| Rotating speed | 12,000 rev/min |
| Sweeping frequency | 0 to 300 kHz for a 10-m long cable |
| For a 200-m long cable | 0 à 50 kHz |
| Shaft diameter | 6mm |
| Mass moment of rotor | 2.3 10E-6 kgm² |
| Rotating torque | à 20°C < ou = 0.01 Nm |
| Shaft load | |
| Axial | 10 N |
| Radial | 20 N |
| Approx. weight | 250 g |
| Operating temperature | From -40+C to 70°C |
| Storage temperature | From -40+C to 80°C |
| Vibration | (50-2000 Hz) < or = 100 m/s2 |
| Impacts | (11 ms) < or = 1000 m/s2 |
