By industry

Aeronautics & aerospace

Immersion temperature probe

Celians proposes different models of thermocouples and 100-Ohm platinum probes to perform atmosphere, contact, surface and immersion temperature measurements.
Dimensions, connectors, fixings, and coating on request.
Please contact us to define the model that fits your application....

Read More

Atmosphere temperature probe

Celians offers different models of thermocouples and 100-Ohm platinum probes to perform atmosphere, contact, surface and immersion temperature measurements.
Dimensions, connectors, fixings, and coating on request.
Please contact us to define the model that fits your application....

Read More

ICP single-axis accelerometer – Serie CMCP1100

An accelerometer is a transducer that converts a mechanical acceleration into a proportional electrical signal (i.e. the sensibility) expressed in mV/g or pC/g.
CELIANS proposes two ranges of accelerometers, the single-axis range and the 3-axis range, with measurement ranges from +/ 4 g to +/ 50 g, and sensibilities from 80 to 500 mV/g, depending on models. Other ranges can also be made available.
Please contact us to define the model meeting the requirements of your application....

Read More

Position rotating sensor – Serie PS

PS-range sensors are designed to measure angle displacements over 340° to 350°. They can make different revolutions at the maximal rotating speed of 600 rev/min. They include a potentiometric plastic track.

  • Separate linearity: ± 0,05% (standard is ± 0,5%).
  • Infinite resolution.
  • Repeatability: 0.01 of the CET.
  • Rotating speed up to
  • Lifespan > 100x106 operations at 10 rev/s.
  • Protection class: IP 40.
...

Read More

Potentiometric and magneto resistive displacement sensor – PY2

PY2-range sensors are designed to measure linear displacements from 0-10 mm to 50 mm. Three measurement ranges are available, all with a linearity ranging from 0.2 to 0.1%.
They feature a contact tip and a return spring and they include a potentiometric plastic track.

  • Separate linearity up to ± 0,1%.
  • Infinite resolution.
  • Lifespan > 100x106 operations.
  • Displacement speed up to 10 m/s.
  • Protection class: IP40.
...

Read More

Potentiometric and magneto resistive displacement sensor – Série LT

  • LT-range sensors are designed to measure linear displacements from 0-50 mm to 900 mm. Different measurement ranges are available, with a linearity ranging from 0.1% to 0.05%
  • They include a potentiometric plastic track.
  • Separate linearity up to 0.05%.
  • Infinite resolution.
  • Repeatability: 0,01 mm.
  • Displacement speed up to 5 m/s (optional: 10 m/s).
  • Lifespan > 100x106 operations.
...

Read More

Static torque meter – Serie CS2

Universal non-rotating torque meters.
Large range of capacity: from 10 to 2,000 Nm.
Easy installation.
Compact, small size.
Protection class: IP 65 (IP 54 for versions 10 and 24 Nm).
EEx ia IIC T4 / T6 version, certified to be used in explosive area.
Available in a special high temperature fabrication variant.
Available with a high output signal.
Available with a double Wheatstone bridge.
Material: stainless steel 6200.
Nickel-plated 6205.
...

Read More

Incremental Encoders – ROD436

ROD 436 encoders are designed to measure angle displacements of rotating speeds.

  • Two 90°-offset incremental encoders to perform the counting of both Ua1 and Ua2 angles.
  • 1 Ua0 top zero.
  • 1 UaS perturbation signal.
  • As standard, they propose from 50 to 10,000 lines per revolution.

They provide 4 sets of pulses:
Using a ME 26 F/U frequency conversion / voltage card makes possible to get a 0-10V analog output, depending on the...

Read More

Cable displacement sensor – Serie CD 50

A linear CD50 works according to the principle of a thread taut between a mobile element and a fixed element, fitted with a return spring drum. The drum then converts the linear displacement into an angle displacement. The shaft of the drum is fitted with a potentiometer, and operates an incremental encoder or an absolute encoder....

Read More

ME2657 - High accuracy programmable attenuator with analog and USB outputs (table set)

MEIRI 2657-ATT90 USB box offers analog electronics allowing to attenuate voltage signals until -90dB, with a ±0.1dB accuracy.
Attenuated signal input and output are made thought BNC connectors.
Programming attenuation is set up from the front panel or from a USB plug.
A dashboard on the PC screen enables to set up the attenuator. It can also be programmed by a DLL included with the equipment. Standard model “A” is supplied by mains, version “B” is supplied by rechargeabl...

Read More

2680C - Multichannel multifunction measuring unit

2680C measuring unit is able to condition from 4 to 16 sensors, with totally different sensor on each channel.
2680 control unit allows to set up acquisition channels configurations as gain, zero, offset… by sending digital commands handled through the control panel; or be set up with USB connection through a remote PC to acquire direct data and exploit them into Microsoft Excel for instance (.csv files)...

Read More