Chemistry
Piezoresistive pressure transmitter – Series 23(S)Y / 25Y
The Series 23SY / 25Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields. The limits of the CE standard are undercut by a factor of up to 10 with conducted and radiated fields.
- Series 23SY Ranges 0,1…1000 bar Fully welded (no internal seals)
- Series 25Y Ranges 0,5…1000 bar Flush, fully welded...
Piezoresistive pressure transmitter – Serie 21Y
The 21Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields. The 21Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields....
Immersion temperature probe – STI
This type of sensor is ideally suited for oil measurements, such as engine oil or other fluids within the limits of the RTD type sensing element. This model meets the requirements of MILSTD-810F. Its fast response time and good accuracy make it an ideal sensor for accurate measurements in harsh environments. A transmitter with an analog output (voltage or current) is integrated inside the body. The 316L stainless steel body and the laser welding between the body and the connector ensure an unma...
Position rotating sensor – Serie PS
PS-range sensors are designed to measure angle displacements over 340° to 350°. They can make different revolutions at the maximal rotating speed of 600 rev/min. They include a potentiometric plastic track.
- Separate linearity: ± 0,05% (standard is ± 0,5%).
- Infinite resolution.
- Repeatability: 0.01 of the CET.
- Rotating speed up to
- Lifespan > 100x106 operations at 10 rev/s.
- Protection class: IP 40.
Rotating torque meter – Serie CR5
The 4502A series torque transducer consists of a test body equipped with strain gauges and mounted in a free rotating housing with integrated connectors. A rotating collector ensures the transmission of the signal between the test body and the housing.
- Different geometries (type H, Q, R, RAU)
- Angle measurement (option A)
- Accuracy 0.2% EM
- Measurement ranges ±0.5 to ±1000Nm...
Static torque meter – Serie CS2
General purpose, non-contact rotary torque sensors with square or round shaft.
- Bidirectional
- Integrated signal conditionning
- Analogue output signal
- Cable length: 5 m...
Rotating torque meter – Serie CR1
The 4501A series torque transducer consists of a test body equipped with strain gauges and
mounted free to rotate in a housing integrating the connectic. A rotating collector ensures the
transmission of the signal between the test body and the housing.
- EM FROM ± 0.5 TO ± 1000Nm
- Accuracy 0.2%EM
- Angle measure (Option A)
- Different geometries (type H, Q, R)...
Static torque meter – Serie CS1
- Material: Stainless steel
- Protection class: IP97
- Low design
- Cost-effective solution
- Sturdy design
- Easy to install
- Whole range of mounting kits available
- Cable length: 6 m...
Static torque meter – Serie CS3
Universal non-rotating torque meters combining accuracy and sturdiness.
- Easy to install, compact design
- Protection class: iP65
- Materialstainless steel (61000), nickel-plated steel (6105)
- Cable length: 3m...
Cable displacement sensor – Serie CD 50
A linear CD50 works according to the principle of a thread taut between a mobile element and a fixed element, fitted with a return spring drum. The drum then converts the linear displacement into an angle displacement. The shaft of the drum is fitted with a potentiometer, and operates an incremental encoder or an absolute encoder....
ME52C - Analog signal converter Rail DIN
The ME52C converts and amplifies signals originating from all types of electronic devices or sensor to deliver a standardized analog output (±10V, 4-20mA, etc.).
The ME52C is a modular analog signal converter for installation on a DIN rail. It is chiefly designed for the adaptation of signals in order to deliver an analog output which can be used by an acquisition system or a programmable controller.
It can also be used as a voltage or current amplifier, an impedance adaptor ...
2680C - Multichannel multifunction measuring unit
2680C measuring unit is able to condition from 4 to 16 sensors, with totally different sensor on each channel.
2680 control unit allows to set up acquisition channels configurations as gain, zero, offset… by sending digital commands handled through the control panel; or be set up with USB connection through a remote PC to acquire direct data and exploit them into Microsoft Excel for instance (.csv files)...
ME520 - Converter of signals and conditioner of analog sensors for strain gauges, DIN rail format.
The single channel measurement model ME520 provides very complete analog outputs for measurement, conditioning and conversion of signals such as strength, torque, pressure, displacement, acceleration sensors or strain gauges.
Three parameters can be adjusted with an easy procedure that allows output trimming depending on the sensor:
- A potentiometer to trim gain
- A potentiometer to trim zero
- A push button to trim calibration