By industry

Research & education

Immersion temperature probe

Celians proposes different models of thermocouples and 100-Ohm platinum probes to perform atmosphere, contact, surface and immersion temperature measurements.
Dimensions, connectors, fixings, and coating on request.
Please contact us to define the model that fits your application....

Read More

Atmosphere temperature probe

Celians offers different models of thermocouples and 100-Ohm platinum probes to perform atmosphere, contact, surface and immersion temperature measurements.
Dimensions, connectors, fixings, and coating on request.
Please contact us to define the model that fits your application....

Read More

ICP single-axis accelerometer – Serie CMCP1100

An accelerometer is a transducer that converts a mechanical acceleration into a proportional electrical signal (i.e. the sensibility) expressed in mV/g or pC/g.
CELIANS proposes two ranges of accelerometers, the single-axis range and the 3-axis range, with measurement ranges from +/ 4 g to +/ 50 g, and sensibilities from 80 to 500 mV/g, depending on models. Other ranges can also be made available.
Please contact us to define the model meeting the requirements of your application....

Read More

Rotating torque meter – Serie CR6 DF

Specially designed for measurement of torques of ‘motors and gearboxes’. DF-range sensors offer an exceptional integration ability in order to perform dynamic measurements up to 20,000 Nm.

  • Good precision
  • Easy to implement
  • Ultra flat
  • Direct fitting. No coupling required.
...

Read More

Rotating torque meter – Serie CR7

Type 4503A... torque sensors with built-in speed sensor operate on the strain gauge principle. An integral, digital measurement conditioning system produces analog or digital output signals.

  • Rated torque: 0.2 ... 5,000 Nm
  • Ratio for second range: 1:10 or 1:5 of rated torque
  • Speed ranges up to 50,000 1/min
  • Accuracy class in standard measuring range: 0.1
  • In the extended measuring range: 0.2

- Integral speed sensor - Serial ...

Read More

Potentiometric and magneto resistive displacement sensor – PY2

PY2-range sensors are designed to measure linear displacements from 0-10 mm to 50 mm. Three measurement ranges are available, all with a linearity ranging from 0.2 to 0.1%.
They feature a contact tip and a return spring and they include a potentiometric plastic track.

  • Separate linearity up to ± 0,1%.
  • Infinite resolution.
  • Lifespan > 100x106 operations.
  • Displacement speed up to 10 m/s.
  • Protection class: IP40.
...

Read More

Potentiometric and magneto resistive displacement sensor – Série LT

  • LT-range sensors are designed to measure linear displacements from 0-50 mm to 900 mm. Different measurement ranges are available, with a linearity ranging from 0.1% to 0.05%
  • They include a potentiometric plastic track.
  • Separate linearity up to 0.05%.
  • Infinite resolution.
  • Repeatability: 0,01 mm.
  • Displacement speed up to 5 m/s (optional: 10 m/s).
  • Lifespan > 100x106 operations.
...

Read More

Rotating torque meter – Serie CR5

Type 4502A... torque sensors operate on the strain gauge principle and supply an analog output
signal of ±0 ... 5 V which is contactless transferred. Also available with integrated rotational
angle/speed measurement.

  • Smart (integral measuring electronics)
  • Interference resistance due to active torque output (±5 VDC), electrically isolated from supply and measuring signal
  • Non-contact signal transfer
  • Unipolar supply
  • Highly responsiv...

Read More

Static torque meter – Serie CS2

Universal non-rotating torque meters.
Large range of capacity: from 10 to 2,000 Nm.
Easy installation.
Compact, small size.
Protection class: IP 65 (IP 54 for versions 10 and 24 Nm).
EEx ia IIC T4 / T6 version, certified to be used in explosive area.
Available in a special high temperature fabrication variant.
Available with a high output signal.
Available with a double Wheatstone bridge.
Material: stainless steel 6200.
Nickel-plated 6205.
...

Read More

Incremental Encoders – ROD436

ROD 436 encoders are designed to measure angle displacements of rotating speeds.

  • Two 90°-offset incremental encoders to perform the counting of both Ua1 and Ua2 angles.
  • 1 Ua0 top zero.
  • 1 UaS perturbation signal.
  • As standard, they propose from 50 to 10,000 lines per revolution.

They provide 4 sets of pulses:
Using a ME 26 F/U frequency conversion / voltage card makes possible to get a 0-10V analog output, depending on the...

Read More

Rotating torque meter – Serie CR1

CR1 torque sensors operate on the strain gauge principle and supply an analog output signal of ±0
... 5 V, which is contactless transferred. Also available with integrated rotational angle/speed
measurement.

  • Smart (integral measuring electronics)
  • Interference resistance due to active torque output (±5 VDC), electrically isolated from supply and measuring signal
  • Non-contact signal transfer
  • Unipolar supply
  • Highly responsive to dyna...

Read More

Cable displacement sensor – Serie CD 50

A linear CD50 works according to the principle of a thread taut between a mobile element and a fixed element, fitted with a return spring drum. The drum then converts the linear displacement into an angle displacement. The shaft of the drum is fitted with a potentiometer, and operates an incremental encoder or an absolute encoder....

Read More

2655C - Portable multifunction single-way conditioner amplifier readout

The portable instrument MEIRI 2655 features a very complete analog and digital electronics allowing the conditioning of strain gauge sensors, potentiometric displacement sensors or LVDT, and the measurement of voltage or current. It is designed to measure peak to peak very rapidly. Using it is very simple: thanks to the drop-down menu, the user can select the sensibility, the measuring range of the sensor, the measurement unit and the measuring condition to operate (tracker or peak of a value, u...

Read More

ME52C - Analog signal converter Rail DIN

The ME52C converts and amplifies signals originating from all types of electronic devices or sensor to deliver a standardized analog output (±10V, 4-20mA, etc.).

The ME52C is a modular analog signal converter for installation on a DIN rail. It is chiefly designed for the adaptation of signals in order to deliver an analog output which can be used by an acquisition system or a programmable controller.

It can also be used as a voltage or current amplifier, an impedance adaptor ...

Read More

2680C - Multichannel multifunction measuring unit

2680C measuring unit is able to condition from 4 to 16 sensors, with totally different sensor on each channel.
2680 control unit allows to set up acquisition channels configurations as gain, zero, offset… by sending digital commands handled through the control panel; or be set up with USB connection through a remote PC to acquire direct data and exploit them into Microsoft Excel for instance (.csv files)...

Read More

ME520 - Converter of signals and conditioner of analog sensors for strain gauges, DIN rail format.

The single channel measurement model ME520 provides very complete analog outputs for measurement, conditioning and conversion of signals such as strength, torque, pressure, displacement, acceleration sensors or strain gauges.
Three parameters can be adjusted with an easy procedure that allows output trimming depending on the sensor:

  • A potentiometer to trim gain
  • A potentiometer to trim zero
  • A push button to trim calibration
A wide range of opti...

Read More