Sensors

Piezoresistive pressure transmitter – Series 23(S)Y / 25Y

The Series 23SY / 25Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields. The limits of the CE standard are undercut by a factor of up to 10 with conducted and radiated fields.

Series 23SY Ranges 0,1…1000 bar Fully welded (no internal seals)
Series 25Y Ranges 0,5…1000 bar Flush, fully welded...

Piezoresistive pressure transmitter – Serie 21Y

The 21Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields. The 21Y product line is outstanding due to its extreme ruggedness towards electromagnetic fields....

Immersion temperature probe – STI

This type of sensor is ideally suited for oil measurements, such as engine oil or other fluids within the limits of the RTD type sensing element. This model meets the requirements of MILSTD-810F. Its fast response time and good accuracy make it an ideal sensor for accurate measurements in harsh environments. A transmitter with an analog output (voltage or current) is integrated inside the body. The 316L stainless steel body and the laser welding between the body and the connector ensure an unma...

Atmosphere temperature probe- STA

This model of temperature sensor exists in PT100 platinum probe version or in thermocouple version. It is ideal for ambient temperature measurements. This range of sensors is equipped with a shielded Teflon extension cable and a support plate for fixing...

ICP single-axis accelerometer – Serie CMCP1100

The CMCP1100 100 mV/g accelerometer with integral 5, 10 or 20 meter cable is manufactured to high quality standards. Each accelerometer is sealed in a waterproof stainless steel case....

S sensor – Serie F2710

Universal force sensor combining accuracy, robustness and easy implementation.

Large range of capacity: from 5 kN to 50 kN.
Stainless steel.
Protection class: IP67.
Compact, small size.

...

Position rotating sensor – Serie PS

PS-range sensors are designed to measure angle displacements over 340° to 350°. They can make different revolutions at the maximal rotating speed of 600 rev/min. They include a potentiometric plastic track.

Separate linearity: ± 0,05% (standard is ± 0,5%).
Infinite resolution.
Repeatability: 0.01 of the CET.
Rotating speed up to
Lifespan > 100x106 operations at 10 rev/s.
Protection class: IP 40.

...

Force sensor S – Serie F2712

Universal load cell combining high accuracy, sturdiness and easiness to install

Wide range of capacities : 100 N ‡ 1kN
Overload protection in tension and compression (not for 2712-5kN and 2712-10kN) (Large version)
Easy to install, compact design
Protection IP54 / IP 65 (See drawing)
Material : Anodized aluminum alloy
Cable length: 3m
Also available as standard reference load cells following ISO 376 (see 2712-ISO)...

1/2/3-axis inclinometer – Serie ME26400 BOX - Serie ME26400 BOX

Measurement of angle on 1/2/3 axes.
Measurement range: ± 10, 30, 70, 80, 360°.
Cast aluminium housing. Protection class: IP65.
Analog output: 4-20 mA, 0-5 V, ± 5 V.
•Zero and gain adjustable through potentiometers.

...

Potentiometric and magneto resistive displacement sensor – PY2

PY2-range sensors are designed to measure linear displacements from 0-10 mm to 100 mm. Three measurement ranges are available, all with a linearity ranging from 0.2 to 0.1%.
They feature a contact tip and a return spring and they include a potentiometric plastic track.

Separate linearity up to ± 0,1%.
Infinite resolution.
Lifespan > 100x106 operations.
Displacement speed up to 10 m/s.
Protection class: IP40.

...

Potentiometric and magneto resistive displacement sensor- Serie PY3

PY3-range sensors are designed to measure linear displacements from 0-10 mm to 100 mm, with a linearity ranging from 0.3% to 0.1%. They feature a contact caster and a return spring and they include a single plastic track.

Separate linearity up to ± 0,1%.
Infinite resolution.
Lifespan > 100x106 operations.
Displacement speed up to 10 m/s.

...

Potentiometric and magneto resistive displacement sensor – Série LT

LT-range sensors are designed to measure linear displacements from 0-50 mm to 900 mm. Different measurement ranges are available, with a linearity ranging from 0.1% to 0.05%

They include a potentiometric plastic track.
Separate linearity up to 0.05%.
Infinite resolution.
Repeatability: 0,01 mm.
Displacement speed up to 5 m/s (optional: 10 m/s).
Lifespan > 100x106 operations.

...

Rotating torque meter – Serie CR5

The 4502A series torque transducer consists of a test body equipped with strain gauges and mounted in a free rotating housing with integrated connectors. A rotating collector ensures the transmission of the signal between the test body and the housing.

Different geometries (type H, Q, R, RAU)
Angle measurement (option A)
Accuracy 0.2% EM
Measurement ranges ±0.5 to ±1000Nm...

Static torque meter – Serie CS2

General purpose, non-contact rotary torque sensors with square or round shaft.

Bidirectional
Integrated signal conditionning
Analogue output signal
Cable length: 5 m...

Bending sensor – Serie F1200

F1200-range sensors are designed to measure forces by operating on both bending directions, through a measuring range from 0.5N (full scale) to 125N P.E.
This is the first low cost range of sensors offering accurate readings. Features proposed by vacuum-packed stress gauges are excellent, including exceptional long-lasting stability.
...

Miniature sensor – Serie F5930-F5932

Sealed and compact tension and compression sensors.

Material:

5930: stainless steel
5932: anodised aluminium alloy

Protection class: IP65

Capacities:

5930: 200 – 300 – 500 N
5932: 1 – (1.5) – 2 – (3) – 5 kN

...

Incremental Encoders – ROD436

ROD 436 encoders are designed to measure angle displacements of rotating speeds.

Two 90°-offset incremental encoders to perform the counting of both Ua1 and Ua2 angles.
1 Ua0 top zero.
1 UaS perturbation signal.
As standard, they propose from 50 to 10,000 lines per revolution.

They provide 4 sets of pulses:
Using a ME 26 F/U frequency conversion / voltage card makes possible to get a 0-10V analog output, depending on the...

Force ring – F5900

Annular force transducers specially designed for applications requiring a load measurement through a centred.
Material: stainless steel
Protection class: IP67

Capacities:

5900 Force: 3 – 5 – (7.5) – 10 – (15) – 20 – 30 - 50 – 75 – 100 – 150 – (200) kN
5900 HOIST: 0.2 – 0.5 – (0.75) – 1 – (1.5) – 2 – 3 – 5 – 7.5 – 10 – 15 t...

Rotating torque meter – Serie CR1

The 4501A series torque transducer consists of a test body equipped with strain gauges and mounted free to rotate in a housing integrating the connectic. A rotating collector ensures the transmission of the signal between the test body and the housing.

EM FROM ± 0.5 TO ± 1000Nm
Accuracy 0.2%EM
Angle measure (Option A)
Different geometries (type H, Q, R)...

Static torque meter – Serie CS1

Material: Stainless steel
Protection class: IP97
Low design
Cost-effective solution
Sturdy design
Easy to install
Whole range of mounting kits available
Cable length: 6 m...

Static torque meter – Serie CS3

Universal non-rotating torque meters combining accuracy and sturdiness.

Easy to install, compact design
Protection class: iP65
Materialstainless steel (61000), nickel-plated steel (6105)
Cable length: 3m...

Cable displacement sensor – Serie CD 50

A linear CD50 works according to the principle of a thread taut between a mobile element and a fixed element, fitted with a return spring drum. The drum then converts the linear displacement into an angle displacement. The shaft of the drum is fitted with a potentiometer, and operates an incremental encoder or an absolute encoder....